Spring balancer Tecna 9506ES
Reference : 9506ES
Load: 60–70 kg. Working travel: 2100 mm.
Technical specifications
| Manufacturer reference | 9506ES |
|---|---|
| Brand | Tecna |
| Range | ESD spring balancers |
| Minimum load | 60 kg |
| Maximum load | 70 kg |
| Working travel | 2100 mm |
| Environment | ESD |
| Cable material | Stainless steel |
| Housing material | Aluminium |
| Factory locking options | BC — locking/unlocking controlled from the floor — 7190000004 |
| Option F | Available when ordering — 9506.FES |
Options available for this reference
BC · F · RC
Compatible accessories
| Reference | Accessory specifications |
|---|---|
| 72969/0,5 | 500 mm |
| 72969/1 | 1000 mm |
| 72969/2,5 | 2500 mm |
| 72969/3 | 3000 mm |
| 72969/5 | 5000 mm |
One extension per balancer. Working travel remains unchanged.
Application
An ESD balancer supports a tool and reduces handling effort at workstations used to assemble, inspect or repair electronic components. Its antistatic design and grounding allow integration into an electrostatic discharge protected area, known as an EPA.
This Zero Gravity version compensates the tool’s weight within its rated load range, following movements and supporting the tool at the working height.
Selection points
Factory options must be selected with the balancer when ordering. They cannot be added later to a unit not built to accept them.
Check grounding and electrical continuity in accordance with the instructions and the workstation ESD control plan. ESD design does not establish ATEX suitability.
The total suspended weight must remain within the load range. A cable-end extension does not change the working travel.
Technical documents
- ESD catalogue — technical data and selection · PDF · FR
- Operating instructions — 9502ES-9525ES · PDF · FR / EN / DE / IT / ES